AXEL ULite Hardware Manual
v.1.0.2
Please refer to the XUELK Quick Start Guide for further details.
7.5.3
SD/MMC Recovery
MMC recovery is a valuable options that requires no special hardware at
all, apart a properly formatted MMC. When SD/MMC boot option is
selected, bootrom looks for a valid bootloader on SD/MMC. Once the
board is running after booting from SD, reprogramming the flash memory
is straightforward. The SD peripheral used for boot is MMC/SD/SDIO1
(please refer to 6.1.3.1).
7.6
Multiplexing
Most of the i.MX6UL processor pins have multiple signal options. These
signal to pin and pin to signal options are selected by the input output
multiplexer called IOMUX. The IOMUX enables flexible IO multiplexing
and is also used to configure other pin characteristics, such as voltage
level, drive strength, and hysteresis. Each IO pad has default and up to
seven alternate functions, which are software configurable.
Please refer to the following sections of the i.MX6UL APRM for further
information pin assignment:
●
chapter 4 “External Signals and Pin Multiplexing”
●
section 4.1 “Pin assignments”
●
section 4.2 “Muxing options”
●
chapter 36 “IOMUX Controller (IOMUXC)”
August, 2019
60/65
Summary of Contents for Axel ULite
Page 2: ...AXEL ULite Hardware Manual v 1 0 2 Page intentionally left blank August 2019 2 65...
Page 6: ...AXEL ULite Hardware Manual v 1 0 2 August 2019 6 65...
Page 31: ...AXEL ULite Hardware Manual v 1 0 2 Tab 13 J2 odd pins 1 to 203 August 2019 31 65...
Page 65: ...AXEL ULite Hardware Manual v 1 0 2 Fig 7 Accessing the RESERVED AREA August 2019 65 65...
