background image

3

OPERATING MANUAL

ABOUT YOUR LASER LEVEL

Thank you for purchasing this DATUM Dual Grade Rotary Laser. Your instrument features extra 

bright laser technology, motorised self-levelling, manual dual grade on both X and Y axis and 

much more. 
Please read and understand the content of this instruction manual before using this product. 

Save this manual for future reference. 

SPECIFICATIONS 

MODEL

DTR30R

DTR30G

BEAM COLOUR

Red

Green

LASER CLASS

Class 2

Class 3R

LASER WAVELENGTH

635nm

520nm

ACCURACY

±2 mm at 30m

OPERATING RANGE (WITH DETECTOR)

Ø300m

AUTO LEVELLING RANGE

±5°

BATTERY LIFE (CONTI. OPERATION)

20 Hours

15 Hours

POWER SUPPLY

4 x C-cell 1.5V batteries 

4 x Ni-MH 1.2V  4000 mAh rechargeable batteries    

Ni-MH BATTERY CHARGER (INDOOR)

Input:100-240V~, 50/60Hz         Output: 5.6V, 900mA

LINE PATTERN

360° Rotating Line

PLUMB DOTS

Up and Down (Red) 

Up (Green) and Down (Red)

IP RATING

IP65

TRIPOD THREADS

5/8” on side and base for horizontal and vertical operations

REMOTE CONTROL

DT20RM

DETECTOR

DT03REC

DT04REC

DATUM is constantly improving its products. All information in this manual is based on the latest product information available at the time of 
printing. The specifications outlined herein are subject to change without prior notice or obligation. 

HAZARD SIGNAL WORD DEFINITIONS

  

!

Indicates an imminently hazardous situation which, if not avoided, will result 

in death or serious injury. Obey all safety messages that follow this symbol to 

avoid possible injury or death.

          

DANGER

Indicates an imminently hazardous situation which, if not avoided, will result 

in death or serious injury.

          

WARNING

Indicates a potentially hazardous situation which, if not avoided, could result 

in death or serious injury.

          

CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result 

in minor or moderate injury.

CAUTION

Used without the safety alert symbol indicates a potentially hazardous 

situation which, if not avoided, may result in property damage.

!

     

!

     

!

     

Summary of Contents for DTR30G

















Reviews: