6
Step 9 : The rear handle
Press rear handle center button to remove battery cover.
Connect rear handle with front handle already installed
into latch through the conncting screws.
Make sure secure-lock button is facing down.
Step 11 : Power
Insert 4 AA 1.5V batteries in the rear handle.
Ensure correct polarity (The negative end of the battery
should contact with the spring end).
Step 10 : Close the gap
Screw the hex nuts inside rear handle with the hex key
to fasten the connecting screws.
Step 12 : Finish
Close battery compartment cover by pressing the
center button. Make sure the cylinders A and B fit
horizontally into their corresponding socket holes.
