Dateq MusiCall, Installation Manual

Page: 26 / 28

11 Configuring MusiCall Installation manual EN
Qfm
Configuring the Qfm
Entering the presets with the PC
software select the menu ‘Qfm’
Æ
‘Show presets’, or press F8.
The configuration window is
opened. Select the preset and enter
the new frequency with the keyboard. Press <enter> to store.
When all the presets are entered press ‘Upload’ to store the new presets in the tuner.
Each preset can have a station name. It can be entered in the textbox on the right.
When the box ‘Tuner x mono’ is checked the output is switched to mono. This is
useful when the signal is interfered due to a bad reception.
The checkbox ‘Keys on front enabled’ can enable or disable the four switches on the
front to prevent accidental switching the tuner to a different preset.
Operating the Qfm
The headphones output can be used to monitor the signal of the currently selected
tuner. The tuner number is showed in the display. To switch to another tuner simply
press the + or the - key on the Qfm-front.
To select a preset push the PSet key. The LCD-screen shows the selected tuner,
and the preset number with the corresponding frequency. Now press +, or - to scroll
through the presets. Push the PSet key again to return to the main menu.
Pushing the Freq key adjusts the frequency of the currently selected preset. The
LCD-screen shows the preset number and the frequency. By pushing the + and - key
the frequency can be adjusted. To store the new frequency push the Freq key again.