Dateq MusiCall, Installation Manual

Page: 25 / 28

EN MusiCall Installation manual Configuring 10
Qfm
When the Qfm tuner is connected
the MusiCall host must be told to
which inputs the tuners are
connected. This is necessary to
display the corresponding RDS
information on the wallunits, and to
enable the remote-control
functions of the tuner.
When the text ‘RDS’ is selected
the RDS information of the tuner
will be displayed when this input is
selected. When no RDS information is available the station name will be showed.
When no station name is programmed the preset number will be showed. When you
don’t want to show the RDS information select the text ‘MusiCall name’, or ‘Station
name’. Now the regular input-name, or the station name will be showed.
To reserve a tuner for a specific output zone select the box ‘Assign tuner’ (tuner 2 in
this example). The tuner can not be selected by any of the other zones.
When a tuner is in one of the scroll-lists the box ‘assign tuner’ can not be selected.
To change the status, the tuner has to be removed from all the scrolls first!
Scrolls
This window shows the scroll-list for
each zone. Each zone can have its
own list of inputs.
In this example a tuner is assigned
to this output. All 30 presets of the
Qfm can be selected as input for the
scroll-list. When no tuner is
assigned to the output zone the
right window will not be visible. To
add inputs to the scroll-list simply
drag-and-drop the inputs to the
scroll-list. To remove them drop the input back in the available zones list.
You can also add your own local input, or other outputs to the scroll
It is not possible to add an output to the scroll-list which already includes another
output in it’s scroll-list. In the example above ‘Output 1’ can’t be inserted into the
scroll-list of the other outputs.
Store the configuration
When all the settings have been
made the configuration can be
stored on the computer.
Click ‘File’
Æ ‘MusiCall host’ Æ
‘Download to file’. Now a window
appears where the file name and the location of the file can be entered. To restore
the configuration select ‘Upload from file’.