Upgrading Action Replay
Action Replay requires PSP firmware 3.90 or higher to run. It has been tested with
firmware up to 4.5. On newer firmware, Action Replay may require an upgrade to run.
If Action Replay won’t load, please visit the Codejunkies support site (see Section 8)
and check for a software upgrade. Installation instructions will be supplied.
Upgrading your PSP’s firmware
If you want to upgrade your PSP’s firmware it is strongly recommended that you
revert your battery to normal use first (Section 7) and reboot your console. Once you
have upgraded your firmware, enable the battery again to use Action Replay.
Pressing ‘Triangle’ in Action Replay displays the options menu:
Codelist screen
Select All
Enable all codes for the current game.
Note that where codes are
incompatible with each other, only one
in a group will be enabled.
Select None
Disable all codes for the current game.
Show Hidden Items: Yes, No
If you have previously hidden codes,
use this option to make them
temporarily visible (they will be
highlighted). Once visible, you can then
choose to ‘Show’ them permanently.
Hide All Codes
Quickly hide all codes before selecting
only specific codes to be shown.
Gamelist screen
Region: All, US, European, Japanese
Filter the codelist based on the region of
the games. It is suggested that you set this
to your local region because codes for
games from regions other than the region
of your game WILL NOT WORK.
Show Hidden Items: Yes, No
To un-hide a game, you need to be able to
see it. Set this option to ‘Yes’ in order to
temporarilly see hidden games.
Un-Hide All Games / Hide All Games
Quickly hide or un-hide all games, before
selecting only specific games to be
shown/hidden.
Change Background / Scrolling
Background
Change between the included
backgrounds and enable or disable the
background movement when navigating
between the gamelist and codelist.
