1 DATECS
LINEAPRO 7 INDUSTRIAL
USER MANUAL
UM 07.01.12/v1.0.0 15
OPERATION MODES
For start operating with LineaPro 7 Industrial is need to be attached Apple device and installed
application for iOS. For downloading the latest SDK please contact with your distributor.
For turn On LineaPro 7 Industrial press one of the scan buttons and unlock Apple device screen.
Scanning barcodes
LineaPro 7 Industrial can scan 1D and 2D barcodes. To scan barcode first, activate the scanner (by
pressing and holding the scan button). Then position the scanning engine to the center of the barcode
by aiming and the illumination box is over the outer edges of the barcode, as shown on the picture
below. Slowly pull back or forward the unit, while increasing or decrease the distance between the
barcode and the scanning head, until the barcode has been read by the scanner. Barcode data will have
shown on the use application for iOS.
LineaPro 7 Industrial support different types of scanning modes:
- Single Scan
- Multi Scan
- Motion Detect
- Multi Scan without duplicates
