background image

Three Year Warranty 

 

All  Datavideo  products purchased after  July 
1st,  2017  qualify  for  a  free  two  years 
extension  to  the  standard  warranty, 
providing  the  product  is  registered  with 
Datavideo 

within 30

 days of purchase. 

 

Certain parts with limited  lifetime  expectancy  such as  LCD  panels, 
DVD  drives,  Hard  Drive,  Solid  State  Drive,  SD  Card,  USB  Thumb 
Drive,  Lighting,  Non-PCIe  Card  and  third  party  provided  PC 
components are covered for 1 year. 

 

The three-year warranty must be registered on Datavideo's official 
website or with your local Datavideo office or one of its authorized 
distributors within 30 days of purchase. 

Disposal 

For EU Customers only - WEEE Marking 

This  symbol  on  the  product  or  on  its  packaging 
indicates  that  this  product  must  not  be  disposed 
of with your other household waste. Instead, it is 
your  responsibility  to  dispose  of  your  waste 
equipment  by  handing  it  over  to  a  designated 
collection  point  for  the  recycling  of  waste 

electrical  and  electronic  equipment.  The  separate  collection  and 
recycling of your waste  equipment at the time of disposal will help to 
conserve  natural  resources  and  ensure  that  it  is  recycled  in  a  manner 
that  protects  human  health  and  the  environment.  For  more 
information  about  where  you  can  drop  off  your  waste  equipment  for 
recycling,  please  contact  your  local  city  office,  your  household  waste 
disposal service or the shop where you purchased the product. 

Summary of Contents for ZEK-1

























Reviews: