11
Zoom Encoder
The gear should engage with the
camcorder’s zoom ring and the 4-pin
mini-DIN connector should be
connected to the Zoom Sensor port on
the PTR-10/10T MARK II.
The snap-and-
lock mini-din connector of the remote
cable will be securely fastened once
plugged into the Remote port. To
remove, use two fingers to gently hold
the part of the plug labelled by two
arrows then pull the connector
outward.
Note: The size of the gear attached to
the zoom encoder is M0.8. A spare
screw and an M0.6 gear are provided in
a plastic zipper bag. The size of the gear
used should match the size of the zoom
ring on your camcorder.
Summary of Contents for ZEK-1
Page 1: ...ZEK 1 Zoom Encoder Kit ...
Page 20: ...20 Example Setup Sony Z280 ...
