Datavideo VS-150, Instruction Manual

Page: 8 / 20

8
REMOTE:
When switched to REMOTE, the front panel controls are active on the VS-150.
LOCAL:
When switched to LOCAL, the USB port can be connected to a laptop in order to update the
firmware.
Mini USB
USB interface for firmware update
HD/SD-SDI INPUT
BNC connector for SDI input.
HD/SD-SDI OUTPUT
BNC connector for SDI output.
HDMI OUTPUT
HDMI digital signal output connecter.
DC in socket
Connect the supplied 12V PSU to this socket. The connection can be secured by screwing the
outer fastening ring of the DC In plug to the socket.
Grounding Terminal
When connecting this unit to any other component, make sure that it is properly grounded by
connecting this terminal to an appropriate point. When connecting, use the socket and be
sure to use wire with a cross-sectional area of at least 1.0 mm
2