Datavideo VS-150, Instruction Manual

Page: 14 / 20

14
Camera output after adjustments (VECTORSCOPE)
1. Under the same on set lighting conditions aim the camera at a colour reference chart (such as DSC labs’ Chroma Du
Monde).
2. Select VECTORSCOPE mode on the VS-150 using the NEXT MODE option.
3. Now, the VECTORSCOPE displays the analyzed colour components. If the white balance of one camera had been
altered, the VECTORSCOPE matrix can be used as a check point to ensure all cameras have been correctly
aligned.
4. Feeding camera output of 75% colour bars into a Video Switcher confirms if the colour image is correct after the
switcher too.