![background image](http://html1.mh-extra.com/html/datavideo/tp-500-b/tp-500-b_instruction-manual_3768656011.webp)
11
18. Now insert the Mirror glass,
Item J
. There
are Velcro edges to the glass, marry these
edges to the Velcro on
Items C (bottom)
and
I
(top) so it is secure. The shortest
edge of the Mirror glass should be at the
bottom.
NOTE:
The glass has a
red
and a
green
circle sticker
in one corner. The glass
should be fitted with the
green circle
towards the subject
and the
red circle
towards the camera lens
.
19. Turn on the tablet or mobile device being
used, Install and launch the
DV Prompter
software, see pages 12 and 13. Prepare
the prompting text to be used, see page 14.
20. Now set up for the chosen optional remote
control, see pages 15 and 16.
21. Put the configured tablet into the mounting
bracket and ensure it is held securely by
adjusting the size of the bracket holders for
a snug fit and locking them in place. Use
the locking lever on the bottom of
item H
.
22. Adjust the prompting settings where necessary.
23. Adjust the camera exposure settings as necessary. See
Camera Exposure
below
.
24. Read the section regarding your chosen remote control.
Camera Exposure and the 60/40 Glass
After setting up the camera with the 60/40 glass in front of the lens adjust the camera set up and
white balance. This is because the 60/40 Glass affects the camera exposure by approximately 1 stop
almost like the effect of a neutral density filter. Consult your camera manual for further help and
advice with its exposure and white balance settings.