49
These set ups can be modified for use in a lot of different situations.
Please let us know how you are using your SE-800, and take a look at the web site to see how others are
using their SE-800s!
Troubleshooting
No power
No image at output
Audio clipping
Audio or video feedback
Frozen image at output
Image distortions
l
No power
1.
Check the contact of power connector.
2.
Move the SE-800 to a cooler location and allow the unit time to cool off before powering on again.
l
No image at output
1.
Incorrect video input format selection
2.
Turn off the SDI overlay function if there is no SDI overlay device connected.
l
Audio clipping
1.
Audio input level is too high.
2.
Incorrect calibration of audio input level.
l
Frozen image at output
1.
The Freeze function was activated
2.
The video input source is no longer valid, or playback has stopped.
l
Image distortion
1.
The video input level is too high
2.
The video quality is poor from video input source.
