58
Transition
Transition Panel
The
Transition
panel allows the user to bring the selected Preset source to the Program output. The SE-1200 MU
user may determine to use either one of the
Mix, WIPE, Cut
and
AUTO
transitions. In order to use these transition
options, the
BGND
(Background) button on the
TRANSITION CONTROLS
panel needs to be enabled (backlit green).
Transition Modes
Mix Button
The
Mix
button is selected when a dissolve or fade transition between the selected
Program and a Preset source is required. This
Mix
transition is generated by moving the
T-Bar
manually or clicking the
Auto
button.
Wipe Button
The
Wipe
button is selected when a wipe effect transition between the selected
Program and a Preset source is required. This WIPE effect is generated by moving the
T-
Bar
manually or by clicking the
Auto
button.
Cut Button
The
Cut
button is used to instantaneously switch between the currently selected
Program and a Preset source.
Auto Button
Instead of using the manually operated
T-Bar,
the
Auto
button is used to automatically
transition between the selected Program and a Preset source over a set period.
Previewing a selected transition
It is possible to see or test the effect of a selected transition in the Preview Monitor before applying it to the
Program output.
Once the
Pvw
button (TRANSITION CONTROLS panel) is ON (backlit Green), select and apply the transition that you
want to test on the Preview monitor. You will also notice that the Preview Monitor switches to the currently
selected Program source when the
Pvw
button (TRANSITION CONTROLS panel) is turned on. Do not worry as the
selected Preset source has not changed. Click the
Auto
button (TRANSITION panel) or move the
T-Bar
manually to
preview the selected transition.
NOTE:
Remember to disable the
Pvw button
(TRANSITION CONTROLS panel) before attempting to use the
selected transition on the Program output.
