Datavideo RMC-190 Quick Start Manual Download Page 3

 

Warnings and Precautions 

1.

 

Read all of these warnings and save them for later reference. 

2.

 

Follow all warnings and instructions marked on this unit. 

3.

 

Unplug this unit from the wall outlet before cleaning. Do not use liquid or 

aerosol cleaners. Use a damp cloth for cleaning. 

4.

 

Do not use this unit in or near water. 

5.

 

Do not place this unit on an unstable cart, stand, or table. The unit may fall, 

causing serious damage. 

6.

 

Slots and openings on the cabinet top, back, and bottom are provided for 

ventilation. To ensure safe and reliable operation of this unit, and to protect 

it from overheating, do not block or cover these openings. Do not place this 

unit on a bed, sofa, rug, or similar surface, as the ventilation openings on 

the bottom of the cabinet will be blocked. This unit should never be placed 

near or over a heat register or radiator. This unit should not be placed in a 

built-in installation unless proper ventilation is provided. 

7.

 

This product should only be operated from the type of power source 

indicated on the marking label of the AC adapter. If you are not sure of the 

type of power available, consult your Datavideo dealer or your local power 

company. 

8.

 

Do not allow anything to rest on the power cord. Do not locate this unit 

where the power cord will be walked on, rolled over, or otherwise stressed. 

9.

 

If an extension cord must be used with this unit, make sure that the total of 

the ampere ratings on the products plugged into the extension cord do not 

exceed the extension cord’s rating. 

10.

 

Make sure that the total amperes of all the units that are plugged into a 

single wall outlet do not exceed 15 amperes. 

11.

 

Never push objects of any kind into this unit through the cabinet ventilation 

slots, as they may touch dangerous voltage points or short out parts that 

could result in risk of fire or electric shock. Never spill liquid of any kind onto 

or into this unit. 

12.

 

Except as specifically explained elsewhere in this manual, do not attempt to 

service this product yourself. Opening or removing covers that are marked 

“Do Not Remove” may expose you to dangerous voltage points or other 

risks, and will void your warranty. Refer all service issues to qualified service 

personnel. 

13.

 

Unplug this product from the wall outlet and refer to qualified service 

personnel under the following conditions: 

a.

 

When the power cord is damaged or frayed; 

b.

 

When liquid has spilled into the unit; 

c.

 

When the product has been exposed to rain or water; 

d.

 

When the product does not operate normally under normal operating 

conditions. Adjust only  those controls that are covered by the operating 

instructions in this manual; improper adjustment of other controls may 

result in damage to the unit and may often require extensive work by a 

qualified technician to restore the unit to normal operation; 

e.

 

When the product has been dropped or the cabinet has been damaged; 

f.

 

When the product exhibits a distinct change in performance, indicating a 

need for service. 

 

Summary of Contents for RMC-190

















Reviews: