13
Control Functions
Various control methods are described in this section.
RS-422 VISCA Communication Protocol (RMC-180)
The RMC-180 PTZ Camera Controller is designed to control up to 4 Datavideo Pan Tilt Zoom (PTZ)
cameras such as the PTC-150/PTC-150W.
To control the PTZ camera mounted on PTR-10, first connect one of the four RJ-45 ports provided on
the RMC-180 rear to PTR-10’s RS-422 IN port via any RJ-45 cable. Via another RJ-45 cable, connect
PTR-10’s RS-422 OUT port to RS-422 port of the PTZ camera mounted. See the diagram below for
example system setup and refer to the RMC-180 user manual for instructions.
Please note that bit 4 of the DIP switch must be set to OFF. See the
information.
