Datavideo PTR-10, Instruction Manual

Page: 28 / 34

28
DIP Switch
The DIP Switch can be found on one of the system panels and allows the user to set the device’s
VISCA ID, enable remote control (DVIP or RS-422), select the output video resolution, and configure
how the video mode can be selected.
See the table below for various settings.
DIP SW 1/2/3 VISCA ID
(1,2,3) = (ON,OFF,OFF) VISCA-ID 1
(1,2,3) = (OFF,ON ,OFF) VISCA-ID 2
(1,2,3) = (ON ,ON ,OFF) VISCA-ID 3
(1,2,3) = (OFF,OFF,ON) VISCA-ID 4
(1,2,3) = (ON ,OFF,ON) VISCA-ID 5
(1,2,3) = (OFF,ON ,ON) VISCA-ID 6
(1,2,3) = (ON ,ON ,ON) VISCA-ID 7
DIP SW 4 Remote Control Protocol
ON DVIP
OFF RS-422
DIP SW 5/6/7 Resolution
(5,6,7) = (OFF,OFF,OFF) 1920 x 1080i 59.94
(5,6,7) = (ON,OFF,OFF) 1920 x 1080i 50
(5,6,7) = (OFF,ON,OFF) 1280 x 720p 59.94
(5,6,7) = (ON,ON,OFF) 1280 x 720p 50
(5,6,7) = (OFF,OFF,ON) 1920 x 1080p 59.94
(5,6,7) = (ON,OFF,ON) 1920 x 1080p 50
(5,6,7) = (OFF,ON,ON) 3840 x 2160p 29.97
(5,6,7) = (ON,ON,ON) 3840 x 2160p 25
DIP SW 8 Video Mode Selection Method
ON Video mode selectable by DIP switch only
OFF Video mode selectable by OSD menu