Datavideo NVS-35, Instruction Manual

Page: 31 / 64

31
Click the Foreground Color field, then you may either enter the RGB values or select
a color from the color spectrum to set the foreground color. Then fine tune the
selected color by dragging the circle cursor on the palette. Click the color wheel
button at the bottom right corner to confirm selection.
Finally enter the x-coordinate and y-coordinate of the CG object overlaid in the
respective
Location – X and Location – Y fields.
Picture
If you set the CG Type to Picture , you will be required to select a picture file from
your local hard disk. Click Browse to browse the hard drive for your graphic CG file.
After you’ve imported the image, enter the desired width and height in the
respective fields shown below.
Finally enter the x-coordinate and y-coordinate of the CG object overlaid in the
respective
Location – X and Location – Y fields.
R : Red H : Hue
G : Green S : Saturation
B : Blue B : Brightness