7
‘Network’ Setup Screen
a.
User Name and Password
: Use “Select” or “Go to” key to open virtual
keyboard. Move cursor to any letter and press ENTER, or use ‘0’ (zero) to erase
letter. After finished, press “Select” or “Go to” key again to exit virtual
keyboard mode. Press ENTER key on ‘user name’ or ‘password’ to go to next
page
b.
Server IP and Host Name
: Move cursor to select ‘Server static IP’ or ‘Host
Name’. Use numeric key pad of remote to type 3 digits for static IP or use
virtual keyboard to type ‘Host Name’. Press ENTER to next page. (Server IP is
the PC’s IP where your MP-1000 ADMINISTRATION TOOL program is running.
Host Name is go out to Internet server)
c.
Server Port (new feature)
: default is 5021. If not please use remote control
to enter ‘5021’. This port number must match with MP-1000 Administration
Tool’s. Please go to MP-1000 Administration Tool’s Server Setup Utility to
modify server’s port number if 5021 is already occupied. After port changed,
close MP-1000 Administration Tool and open again to make new port effective.
d.
Client DHCP or Static IP
: Move cursor to select ‘DHCP’ or ‘Static IP’ and
press ENTER on ‘Static IP’ to Static IP page or DHCP to Setup screen. (DHCP is
recommended.)
‘Time’ Setup Screen
a.
Time Server
: Use cursor left or right to select ‘time.nist.gov’ or
‘windows.time.com’. Use cursor down to next item
b.
Date
: you can ignore this because client board will get internet time during
power up initialization unless you don’t have internet connection
c.
Time
: Same as Date
d.
Time Zone
: Use cursor left or right to select your local time zone
e.
DST
(Day Saving Time): Use cursor to select On or OFF. If On, it will add
one hour
f.
Reboot Time:
Move cursor to select ‘OFF’ or type 2 digits for daily reboot
time. When time is up, client will reboot itself.
g.
Press ENTER on any field to go back to Setup screen
