9
Save and Reboot:
save all the changes and reboot client
Return to menu
: just return to main menu
[Note-1]: All these client setup settings can be modified in the “Client Setup Utility”
of MP-1000 ADMINISTRATION TOOL software. You can save as “autoconfig.mia”
filename into CF card then plug into CF slot and power up client board. It will show
“Auto Updating” message and save into EEPROM. Remove CF card and delete this
file to avoid reload again.
[Note-2]: You can save as “autoconfig.mib” file name, it will do the same thing to
update EEPROM except this autocinfig.mib file will be deleted after update.
