Datavideo HS-1600T Instruction Manual Download Page 84

Page: 84 / 96

Note 3

: There is no guarantee that the HS-1600T supports all USB disks. When you see all buttons of

the program and preview rows illuminate pink or greenish pink, this indicates that the disk file read
error has occurred. Please try using other USB flash drive brands.

Monitor

To update the HS-1600T Monitor, you will need:



The latest firmware for the

HS-1600T Monitor

This firmware file can be obtained from your local Datavideo office or dealer or product page.



USB 2.0 pen drive with a USB A connector.



HS-1600T x 1



48V Power adapter x 1

Update Procedure

Unzip / extract the supplied zipped archive or rar folder.

Wipe the contents of the USB 2.0 pen drive so it is empty.

Transfer / copy the unzipped / extracted file to the USB 2.0 pen drive; make sure the file name
is renamed to

MSTFLASH.bin

Plug the USB 2.0 pen drive into the USB 2.0 port labelled MONITOR F/W
UPGRADE on the front of the monitor button panel.

Reboot

HS-1600T

and the update will start automatically.

The

HS-1600T Monitor

will reboot itself at the end of the process.

Note: The USB port can also be used to power the connected USB LED light.

Video Streaming Server

To update the video streaming server, you will need:



The latest firmware for the

video streaming server

This firmware file can be obtained from your local Datavideo office or dealer or product page.



HS-1600T x 1



48V Power adapter x 1

Update Procedure

Visit the official product page

https://www.datavideo.com/tw/product/HS-1600T where you can

download the latest firmware file.

System

tab to open the system configuration page.

Scroll down to

Firmware Update

then click the

Browse

button to search for the latest firmware

file on the PC’s hard disk.

Summary of Contents for HS-1600T
































































































Search results

Summary of Contents for HS-1600T

Reviews:

Related manuals for HS-1600T

Brands by name

Popular brands

Datavideo HS-1600T, Instruction Manual

Search results

Summary of Contents for HS-1600T

Reviews:

Related manuals for HS-1600T

Brands by name

Popular brands