Datavideo HS-1600T Instruction Manual Download Page 62

Page: 62 / 96

You will see the calendar on the left after clicking
the Date field. Simply click a day to set the date.

Click the

Submit

button to save the new settings.

Firmware Update

NVS-31 Firmware Update

Click the

Browse

button to search for the latest

firmware file saved on the PC’s hard disk. Click the

Update

button after the latest firmware file is

uploaded.

Device Name Setting

Enter a name for this device and click the

Submit

button to write this name into the device.

Account Setup

Enter the NVS-31’s account name and password.
Click the

Apply

button to save the new settings.

System Control

Restore to Default

Click this button to restore default settings.

System Reboot

Click this button to reboot the NVS-31.

Summary of Contents for HS-1600T
































































































Search results

Summary of Contents for HS-1600T

Reviews:

Related manuals for HS-1600T

Brands by name

Popular brands

Datavideo HS-1600T, Instruction Manual

Search results

Summary of Contents for HS-1600T

Reviews:

Related manuals for HS-1600T

Brands by name

Popular brands