Datavideo HS-1600T, Instruction Manual

Page: 74 / 96

74
Stop recording

While recording, the RECORD button is solid red.

Press and hold the RECORD button for approximately 2 seconds.

When the record function is terminating, the RECORD button turns from solid red, then
blinking red and finally to solid white.

When the RECORD button is solid white, this indicates that the record function has been
successfully terminated.
Stream Button
Press the STREAM button to start/stop streaming.
Start streaming

When idle, the STREAM button is solid white.

Press and hold the STREAM button for approximately 2 seconds.

When the stream function is activating, the STREAM button turns from solid white, then
blinking red and finally to solid red.

When the STREAM button is solid red, this indicates that the record function has been
successfully activated.
Note: The STREAM button is disabled in the Record Only mode.
Stop streaming

While streaming, the STREAM button is solid red.

Press and hold the STREAM button for approximately 2 seconds.

When the stream function is terminating, the STREAM button turns from solid red, then
blinking red and finally to solid white.

When the STREAM button is solid white, this indicates that the stream function has been
successfully terminated.
Operation Mode
Checking the NVS-31’s operation mode

First make sure the stream and record functions are in idle state, i.e. STREAM and RECORD
buttons are solid white.

Press RECORD or STREAM button.

The button LED should behave according to the device’s operation mode. The LED behaviors
are summarized in the table below:
Solid red RECORD button Solid white RECORD button
Solid red
STREAM button
Stream & Record Stream Only Mode
Solid white
STREAM button
Record Only Mode None

The two buttons turn solid white a few seconds after displaying the operation mode.