Datavideo EPB-1340, Instruction Manual, Page: 69 / 87

69
6. Select “ Output File ” to choose the render files destination. Click the green button to render.
7. Once completed, the status will display “ Done .”
After the sequential files are created and ready, see section 5.4.2 to import the Clip file to the switcher.
Important things to note while creating Stinger Transition Effects
When using Datavideo’s HS-1300 Multi-Channel Switcher to design and create the Stinger Transition Effects,
in addition to being creative, there are a few things that you need to take into account of.
1. Length limit of the stinger transition animation
The length of a good stinger transition animation should be approximately 0.5 to 2 seconds.
2. The HS-1300 allows a maximum of 200 image files in an animation sequence
The number of image files will determine the length of stinger transition time.
3. While designing the animation, it is best to have an image that fills up the entire frame to create a
satisfactory visual effect (please see the images below).