Datavideo EPB-1340, Instruction Manual

Page: 54 / 87

54
Chapter 6 Advanced Operations
6.1 Still Images
This section will show you how to import still images from the PC to the switcher and load the imported
file to the switcher. You are also allowed to export still images from the switcher to the PC for file editing.
Export/Import Still Images to/from the PC
The switcher’s Image Import/Export software ( SwitcherImageImEx_vx.x.x.msi ) allows the user to import
still pictures from the PC to the designated Still number of the switcher and vice versa. The software
installation package can be downloaded from the product page. Features of the Import/Export software
are listed as follows:
- Supported file formats are BMP, JPG, PNG, and PIC.
- Minimum resolution is 1280 x 720.
- Independent exported still pictures in BMP format.
Please follow the steps below to set up the system before installing the software.

First connect the HS-1300 to a Windows computer using an RJ-45 Ethernet cable.

Since the HS-1300 has a default IP address of 192.168.100.101 so the computer should be given the
IP settings that match the same IP range as the switcher.

Turn on the Windows computer and manually set the IP to 192.168.100.X within the Windows
Network and Sharing Centre .
After the connection is successfully established, the system setup is complete. Now install the Switcher
Image Import/Export utility on the computer.
Installation
1. Download SwitcherImageImEx_vx.x.x.msi from the product page and save it on the local disk.
2. Click the installation file icon to start the Setup Wizard.
3. Click “ Next ”