Datavideo CCU-200, Instruction Manual

Page: 25 / 28

- 24 -
9. Product Specifications
CCU-200 Main Unit
Camera IN 17 Pin Jack x 4
CB Cable transmits HDBaseT signal
(video, audio and control), power, look
back video, intercom signal and tally
between CCU-200 and AD-3.
Video IN SDI: BNC x 1
SDI Look Back Video
HD-SDI input video is down-converted to
SD-SDI video by CCU-200 first, then the
SD-SDI video is sent to AD-3 via a CB
cable.
1080p 60/59.94/50
1080i 60/59.94/50
720p 60/59.94/50
Video OUT SDI x 4
Full HD/ HD (Source: Camera)
1080p 60/59.94/50/30/25
1080i 60/59.94/50
720p 60/59.94/50
Control Ports RJ-45 x 3
Connects MCU-400 or RMC-300 for
camera remote control.
Connects ITC-300 (Intercom/Tally)
LED Indicators
Power LED x 4 Power supply indicator (ON: Green)
HDBaseT Link LED x 4
HDBaseT link indicator
(Link activated: Yellow)
AC Power AC IN 100~240VAC 50/60Hz
DC Power (UPS) DC IN 48V / 350W (Max.)
AD-3 Camera Adaptor Specifications
Camera OUT 17 Pin Jack x 1
CB cable transmits HDBaseT signal
(video, audio and control), power, look
back video, intercom signal and tally
between CCU-200 and AD-3.
Video IN HDMI x 1
Source: Camera
1080p 60/59.94/50/30/25
1080i 60/59.94/50
720p 60/59.94/50
Video OUT HDMI x 1
Camera and Look Back Video OUT
When the input video resolution is 25 or
50 fps, the output resolution can be set
to one of the following:

1920x1080p25/50

3840x2160p25
When the input video resolution is 30 or
60 fps, the output resolution can be set
to one of the following:

1920x1080p30/60

3840x2160p30