Datavideo CCU-200, Instruction Manual

Page: 13 / 28

- 12 -
Call Button
The Call Button allows the camera operator to page the
operator at the ITC-300 Digital Intercom System with call
tone via the CCU-200 HDBaseT Camera Control Unit.
TALK Button
Simply press to TALK. The TALK Button allows the camera
operator to speak to the operator at the ITC-300 Digital
Intercom System via the CCU-200 HDBaseT Camera Control
Unit.
Follow the steps outlined below to operate Call and Talk buttons:
1. Press the Call button and the AD-3’s corresponding channel button on the ITC-300
should start flashing red.
2. To talk, the ITC-300 operator should press the flashing channel button and when
the channel button turns solid green, the two-way communication has then been
established.
3. Press the TALK button to speak to the ITC-300 operator via the connected
microphone headset.