- 7 -
Audio LED Meters
These meters play a vital part in correctly setting the audio levels to
avoid clipping or other distortion.
The LED style Audio meters, show the signal strength at the Audio
Output. The signal they measure is determined by the sources
selected by the Audio Bus selectors and the levels set by the rotary
pots and faders.
Audio Monitor Button
Use the Headphone section to monitor any of the sources (CH1, CH
2, CH3, CH4) or “Master” output. Repeated presses of the
Headphone Audio Monitor button will cycle through the monitoring
choices. In many cases, headphones may be a more useful and
accurate choice than speakers for audio monitoring.
Audio Input Source Level Controls
This section of the AM-100 controls which audio input channel
(CH1~CH4) will be sent to the Audio Bus and its associated Fader.
This row of audio channel selection buttons has LEDs built in to
show which input channel is active. Level control for each audio
input source is via the rotary pots above each of the audio channel
selection buttons.
A+V (Audio-Follow-Video)
When this button is engaged or lit, the audio associated with a
selected video input source automatically follows the video through
any transition between the Main and Sub Sources. When the A+V
button is inactive, the audio sources must be switched manually. For
more information, see
A+V
.
AUX Audio Input
Mix input for background music
Audio mixer
These CH1~CH4 Audio Level Faders are for controlling the CH1~CH4
audio mix.
These faders correspond to the Audio Source selector buttons and
control the relative volume of each input in the master output as
well as the master output level.
MASTER
This Slider is for controlling the audio level for the Mixed audio
output.
