PRE PARING FOR THE INSTALLATION
21
Chapter 2
Preparing For the Installation
Before you start installing Touch Terminal, read the following instructions.
Glamor Series do not support PCI slot.
Do not insert or remove any device or component from the Glamor Series while the power is
turned on.
If using Glamor Series in a dusty environment, clean the Touch Terminal regularly.
Only USB devices are Hot Swap capable. Be sure to turn off the power of the touch terminal
and the device before making any connection or disconnection.
The spill proof design of Glamor Series conforms to IP65 standard (Front panel only).
A bug may be found when installing Windows 2000 from a USB CDROM. When this occurs,
please go to the Microsoft website at
http://support.microsoft.com/kb/838921
DQG¿QGWKH
solution.
Always seek the help of authorized service personnel in disassembling the terminal. The
manufacturer will not be held responsible in the event of damage caused by an unauthorized
person.
Before installation or disassembling of the terminal, ensure that the power is turned off.
Otherwise, electric shock may occur and may void the warranty.
For systems preloaded with WEPOS/POSReady/Windows Embedded on the HDD (O/S
pre-installed as an option), the manufacturer provides an optional recovery DVD with the
preloaded operating system delivered with the Touch Terminal. The System Integrator
shall take care of software restoration after an OS recovery. A manufacturer-supplied USB
interface COMBO drive will be required for such action. Other brands of COMBO drive may
UHTXLUHDVSHFL¿FGULYHUGLIIHUHQWIURPZKDWLVVXSSRUWHGLQWKHUHFRYHU\'9'
Please use
the recovery DVD for rescue operation only. Using it otherwise may wipe out whatever
is stored in the HDD
. All upgrade device drivers needed for manual installation are
available in the subfolder “\drivers” in the OS recovered HDD. Then follow the instructions
from your system integrator for software recovery.
For SoC limitation, the G-615S is required to install at least one DDR3 memory module
before booting up the operating system. Be sure to install it in the DDR3 channel 1 socket.
