Datatool is a brand of Scorpion Automotive Ltd
Scorpion House, Drumhead Road, Chorley North Business Park, Chorley, Lancashire, England. PR6 7DE
Tel: +44 (0) 1257 249928 E mail:
Web: http://www.datatool.co.uk
DT201 Operation Guide Revision 1 24-07-2023
5
Arm Silently
If the arm/disarm tones are enabled, it is possible to arm the DT201 silently by pressing the
Programming Button on the remote immediately before pressing the Arm/Disarm button.
The buttons must be pressed within 3 seconds of each other, the DT201 will arm as normal
except the arming notification tones will not be sounded. Subsequent arming sequences will not
be affected.
Disarm Silently
If the arm/disarm tones are enabled, it is possible to disarm the DT201 silently by pressing the
Programming Button on the remote immediately before pressing the Arm/Disarm button.
The buttons must be pressed within 3 seconds of each other, the DT201 will disarm as normal
except the disarming notification tones will not be sounded. Subsequent disarming sequences will
not be affected. On disarming of the alarm system, the alarm LED will remain solid to indicate the
alarm system will enter either Passive Immobilisation or Automatic Rearm will occur.
Automatic Rearming
When enabled, the Automatic Rearming feature will arm the DT201 if the DT201 has been
disarmed via the two-button remote and the ignition is not switched on within 30 seconds. On
disarming of the alarm system, the alarm LED will remain solid to indicate the alarm system will
enter either Passive Immobilisation or Automatic Rearm will occur.
Turning on the ignition or arming via the two - button remote will cancel the Automatic Rearming
feature. Automatic Rearming is disabled by default.
To ensure the machine remains covered at the level chosen if it is accidentally disarmed, when the
system is disarmed it automatically starts a 30 second countdown after which the system will auto
re-arm at the SAME level it was last armed; be it fully armed, armed in Transport Mode or
immobiliser only.
NOTE:
The DT201 will not automatically arm as a result of the ignition being switched off, unless
Passive Arming is enabled. However Passive Immobilisation will occur after 30 seconds.
Arm in Transport Mode
To arm the DT201 in Transport Mode, first press the Arm/Disarm button as normal to arm the
DT201. Then, within 3 seconds of the first button press, press the Programming button which will
disable the movement sensor; the DT201 will chirp a third time (if tones are enabled) and the
indicators will also flash a third time to indicate the movement sensor has been disabled.
The motorcycle instrument LED will now double flash instead of single flash to identify Transport
Mode has been activated.
Transport Mode allows the bike to be moved around (for example when cleaning) or transported
in a van without the DT201 triggering due to movement.
NOTE:
Ignition detection and ECU protection switch detection remain fully active.
To exit Transport Mode simply disarm the DT201 using the Arm/Disarm button and rearm the
DT201 if required.
Long Term Storage Mode
Lo
ng Term Storage Mode, also known as ‘Winter Mode’ is used for motorcycles that are not ridden
for long periods and which are stored securely. When in this mode the DT201 draws negligible
current and will only respond to the ignition being switched on, the movement sensing and ECU
protection switch detection are inoperative.
