Datatool is a brand of Scorpion Automotive Ltd
Scorpion House, Drumhead Road, Chorley North Business Park, Chorley, Lancashire, England. PR6 7DE
Tel: +44 (0) 1257 249928 E mail:
Web: http://www.datatool.co.uk
DT201 Operation Guide Revision 1 24-07-2023
3
3. Align the two casing halves and squeeze firmly to click the casing back together, ensuring the
joint is even around the perimeter.
Operating the DT201 Basic Functions
Arming (turning the DT201 on) and disarming (turning the DT201 off) are the most common
interactions and can be performed with a single button operation on the remote control.
1.
Arm/Disarm button
2.
Programming button
Arming the DT201
To manually arm the DT201 with the motorcycle ignition switched off press the Arm/ Disarm button
on the remote control once. The indicators will flash twice and if arm/disarm tones are enabled, a
double chirp will be heard.
The dedicated alarm LED in the motorcycle instruments will illuminate for 3 seconds and then
flash once every second for a further 10 seconds whilst the system initializes the tilt sensor and
trigger inputs. After 10 seconds, the DT201 is fully armed, and the motorcycle LED will flash at a
rate determined by the motorcycle battery voltage (see Battery Monitoring).
Disarming the Alarm
To disarm the DT201 press the Arm/ Disarm button once. The indicators on your motorcycle will
flash once to confirm the DT201 has disarmed and if the audible chirps are enabled, a single chirp
will be heard, if the alarm system has triggered during the armed state then the siren will sound a
chirp followed by a diagnostics sequence (see Diagnostics). The motorcycle ignition can now be
turned on without triggering the DT201. The DT201 cannot be re-armed within 3 seconds of
disarming. On disarming of the alarm system, the alarm LED will remain solid to indicate the alarm
system will enter either Passive Immobilisation or Automatic Rearming will occur.
Passive Arming
With Passive Arming enabled there is no need to press the Arm/Disarm button to arm the
DT201. Once the motorcycle ignition is switched off the DT201 the alarm LED will illuminate
solid to indicate Passive Arming is enabled and the alarm system will fully arm after the chosen
delay period, which can be chosen by the user from 30 seconds or 1 minute. The indicators will
flash twice and if arm/disarm tones are enabled, a double chirp will be heard automatically
arming.
