I P - D S U U s e r ’ s M a n u a l
02/02/08
27
4.13 Verify Configuration
Syntax: vcfg
The
vcfg
(or
vc
) command displays the current configuration of the unit, and is only
visible when the user is logged in. The command has no arguments.
SAMPLE OUTPUT:
<IP-DSU> vcfg
Current Configuration:
Service State ==> In Service.
Actual Service State ==> Peer Connectivity Established.
Port Interface ==> V.35 DCE.
Port Type ==> Generic HDLC Interface.
Port Speed ==> 56K.
Port Physical Encoding ==> NRZ.
Local MAC Address ==> 0.96.29.2.48.43
Local IP Address ==> 135.17.59.241
Subnet Mask ==> 255.255.255.0
Destination IP Address ==> 135.17.59.242 Device Port 1
Gateway IP Address ==> 135.17.59.1
SNMP Trap Manager ==> Not defined.
Acquired Nhop MAC Address ==> 0.19.35.83.87.55
Loopback Status ==> Loopbacks are not enabled.
Data Encryption Status ==> Disabled.
Data Transport Protocol ==> Peer to Peer via UDP.
4.14 Display Measurements
Syntax: dmeas
The
dmeas
(or
dm
) command displays the current measurements of the unit, and is
only visible when the user is logged in. The command has no arguments.
S a m p l e O u t p u t :
