I P - D S U U s e r ’ s M a n u a l
02/02/08
18
The following command sequence can be followed to quickly configure an
IP-DSU
for
operation. The command sequence may also be performed before field installation,
since configuration parameters are non-volatile once entered.
The
IP-DSU
is pre-configured with a valid, licensed, MAC address. If the MAC address
is lost, refer to the MAC address on the
IP-DSU
bottom label and re-enter it.
When the
IP-DSU
is powered,
<IP-DSU>
is displayed at the console.
Execute the following command sequence to configure the unit.
<IP-DSU>
Type:
login passwd=initial
[RETURN]
Display:
M LOGIN
USER IS LOGGED IN IP-DSU
<IP-DSU>
Type:
lo ipaddr=<this unit’s IP address> submask=<this unit’s
subnet mask>
[RETURN]
Display:
<IP-DSU>
Type:
dest ipaddr=<remote unit's IP address>
[RETURN]
Display:
<IP-DSU>
Type:
gateway ipaddr=<gateway's IP address>
[RETURN]
Display:
<IP-DSU>
Type:
port type=< SWT|SAMWT|T1|DDS|HDLC
(select one)
>
[RETURN]
Display:
<IP-DSU>
Type:
restore
[RETURN]
Display:
M RESTORE
IP-DSU RESTORED TO SERVICE
