DT-6XXX IP-SPOOL Application User’s Manual – Build 12.0
04/13/06
Datatek Applications Inc.
19
The
dconn (dc)
command is used to display all of the current connections into the IP-
SPOOL application. The command does not require any arguments. The report shows the
connection peer for each active connection.
8.15 D
ISPLAY
J
OBS IN
Q
UEUE
–
DQ
|
DQUEUE
Syntax: dq | dqueue
The
dq
command displays all jobs in the queue assigned to the application instance.
8.16
P
URGE
J
OBS IN
Q
UEUE
-
PURGE
Syntax: purge [ queue=<queue name>] [ confirm=yes]
The
purge
command deletes all jobs currently in the queue, where
<queue name>
is the
configured queue name for this instance of the application. The
queue
and
confirm
arguments are both required as shown, since the command is destructive and irreversible.
8.17 D
ISPLAY
L
OG
-
DLOG
Syntax: dlog | dlog clr
The
dlog
command is only visible when the application is logged in. This command is
used to display the entries in the error log. An exclamation point ( ! ) that precedes a log
entry denotes new entries. A double asterisk ( ** ) that precedes a log entry denotes
folding of multiple similar entries into a single line. The log file can be cleared with the
command:
dlog clr
8.18
D
ISPLAY OF
M
EASUREMENTS
-
DMEAS
Syntax: dmeas
The
dmeas
command is only visible when the application is logged in. The command is
used to display the current measurements on all of the interfaces.
8.19 C
LEAR
M
EASUREMENTS
–
CLR
|
CLEAR
Syntax: clr | clear
The measurements displayed with the
dmeas
command are aggregated until cleared. The
clr
command will set all measurements to zero. The command has no arguments.
