DT-6XXX IP-SPOOL Application User’s Manual – Build 12.0
04/13/06
Datatek Applications Inc.
15
8.2 L
OGOUT
Syntax: logout
The
logout
command is only allowed if the console user is logged
in
. It uses no
arguments. It will set the console to the logged
out
mode.
8.3
C
HANGE
P
ASSWORD
-
CHGPASS
Syntax: chgpass PASSWD=<old> NEWPASS=<new> CONFIRM=<new>
The
chgpass
command is used to change a user password on the system console. The
command is only allowed if the user is logged
in
.
All three parameters must be given on the same command line. None of those entries are
echo-suppressed.
If the current password is valid and the two entries for the new password match, the
password is changed to the new value.
8.4 H
ELP
Syntax: help | ? [Command]
The
help
command is always visible. The help command displays the currently allowed
commands for the mode that the unit is currently entered. An alternative to the
help
command is a question mark.
8.5 B
ANNER
M
ESSAGE
-
BANNER
Syntax: banner [ L<#>=”System Banner Line <#>” | default ]
The
banner
command is only visible when the application is
logged in
. The command is
used to configure a system message banner that is displayed to the administrators upon
connection to the ip-spool application. The banner can consist of a maximum of eight (8)
lines of 60 characters each of text including spaces. Each line may be configured
independently of each other with its own tag (i.e. L1, L2, …, L8). The banner lines are
visible on a
verify / vfy
command or by invoking the
banner
command with no
