manualshive.com logo in svg

Datatech Enterprises Apex 386SX/20, User Manual

Share
Download
Datatech Enterprises Apex 386SX/20 User Manual Download Page 2

PEER-2030

Personal Computer

User’s Manual

Edition 1.2

The following does not apply to any country where such provisions are inconsistent
with local law:

We make no warranties with respect to this documentation eithsr express or implied
and provides it “as is”. This includes but is not limited to any implied warranties of
merchantability and fitness for a particular purpose. The information in this document

is subject to change without notice. We assumes no responsibility for any errors that
may appear in this document.

IBM PC, IBM PC/XT and IBM PC/AT are registered trademarks of International
Business Machines Corporation.

MS-DOS is a registered trademark of Microsoft

Corporation. Intel is a registered trademark of Intel Corporation. The typeface used
in the text of this manual is Helvetica and is used under licence from the Allied
Corporation, the owner of the typeface.

All other brand names are registered trademarks of their respective companies

The PEER-2030, this manual and all illustrations in it are copyrighted with all rights
reserved. Under the copyright laws, the PEER-2030, this manual, and the illustra-
tions, may not be copied without the written consent of Datatech Enterprises Co., Ltd.

Documentation design and writing by: Echo Chen, Patty Lee, Hazel Chen, and Alan
Patterson.

© 1991 Datatech Enterprises Co., Ltd.

Summary of Contents for Apex 386SX/20



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands