manualshive.com logo in svg

Datatech Enterprises Apex 386SX/20, User Manual

Share
Download
Datatech Enterprises Apex 386SX/20 User Manual Download Page 127

driver

- A program that lets a peripheral device and a computer

function harmoniously; a hard disk driver controls exchan-
ges between a hard disk and a computer.

expansion slot

- This is a slots in which adapters and/or cards can be

housed.

file

- A file is a collection of related information/data you store

on a diskette or a hard disk drive.

filename

- Each file on a disk has a name. This name has two

parts: a filename and an extension. In DOS, filenames
are from one to eight characters long. An extension
starts with a period, has three characters and follows
immediately after the filename.

fixed or hard disk

- This is a non-removable disk used for storage of large

volumes of data.

format

- The arrangement of data on a magnetic disk. Format

also means to prepare a disk.

hardware

- All physical components of a computer.

Hz

- Hertz. This signifies one complete cycle of a wave signal.

I/O

- Input/Output. The transfer of data between the computer

and its peripheral components.

IC

- Integrated Circuit.

4

Chapter 7: Glossary

Summary of Contents for Apex 386SX/20



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands