6.3.3
Charge the battery in the camera — via a computer
1. Open the cover at the top of the camera.
2. Connect the camera to a computer, using the USB cable.
3. Power on the camera.
Note
Charging the battery via a computer takes considerably longer time than using
the battery charger or power supply.
6.4
Power on/off
6.4.1
Power on
To power on the camera, push the On/Off button.
6.4.2
Standby
When the camera is in on and in live mode, push the On/Off button. This puts the camera
in standby mode.
You can also set up the camera to enter standby mode after a period of inactivity. Select
Settings
>
Device settings
>
Auto power off
.
6.4.3
Power off
To power off the camera, push and hold the On/Off button.
Note
Do not remove the battery to power off the camera.
6.5
Power on/off
To power on and off the camera, push the On/Off button.
Note
Do not remove the battery to power off the camera.
6.6
Save an image
To save an image, pull the trigger.
#T810624; r. AB/92323/92323; en-US
11
