DSVII-SC
®
User Manual, Version 1.11
Copyright
©
2006 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
11
9
Troubleshooting
•
UNIT DOES NOT POWER UP –
The battery may be not plugged in, or is completely discharged. Open the
battery access cover and verify that at least one battery is properly installed. Additionally, use the external AC
power adapter to operate the unit and simultaneously charge the battery.
Please refer to Section 7
Battery
Charging
and Replacement
on Page 7.
•
Unit generates a single “error” beep tone, and the power LED flashes RED once. –
This is an indication
that the internal battery is very low, and does not have sufficient charge to run the unit at all. Plug in the AC
power adapter to change the battery.
