DataRemote POTS in a BOX CDS-9070 User Manual Download Page 5

Page: 5 / 76

V1.0

The page 5 of 76

Revision Time: 2016-10-13

Preface

Thank you for choosing CDS-9070 wireless router with VoIP. This product will allow you to make ATA call using your broadband connection,

and provides Wi-Fi router function.

This manual provides basic information on how to install and connect CDS-9070 wireless router with VoIP to the Internet. It also includes

features and functions of LTE connection, wireless router with VoIP components, and how to use it correctly.

Before you can connect CDS-9070 to the Internet and use it, you must have a high-speed broadband connection installed. A high-speed

connection includes environments such as DSL, LTE wireless network, cable modem, and a leased line.

CDS-9070 wireless router with VoIP is a stand-alone device, which requires no PC to make Internet calls. This product guarantees clear and

reliable voice quality on Internet, which is fully compatible with SIP industry standard and able to interoperate with many other SIP devices

and software on the market.

Summary of Contents for POTS in a BOX CDS-9070











































































Search results

Summary of Contents for POTS in a BOX CDS-9070

Reviews:

Related manuals for POTS in a BOX CDS-9070

Brands by name

Popular brands

DataRemote POTS in a BOX CDS-9070, User Manual

Search results

Summary of Contents for POTS in a BOX CDS-9070

Reviews:

Related manuals for POTS in a BOX CDS-9070

Brands by name

Popular brands