Dataprobe sBB-2C10, Installation And Operations

Page: 9 / 20

Serial BootBar v.090212d
Page 9
Power Source
The sBB-N15 provides a linecord for connection to a 15 Amp 115VAC
service. The total maximum current load for all outlets on the sBB-N15
cannot exceed 12 Amps.
The sBB-2N15provides two linecords for connection to 15 Amp 115VAC
services. The total maximum current load for outlets on any linecord
cannot exceed 12 Amps. Each linecord distributes power to four outlets.
The sBB-N20 provides a linecord for connection to a 20 Amp 115VAC
service. The total maximum current load for all outlets on the sBB-N20
cannot exceed 16 Amps.
The sBB-2N20 provides two linecords for connection to 20 Amp 115VAC
services. The total maximum current load for outlets on any linecord
cannot exceed 16 Amps. Each linecord distributes power to four outlets.
The sBB-C10 is for international applications and can be used on 100V to
240VAC. The sBB-C10 provides an IEC 320 style universal inlet for
connecting a detachable power cord. A standard IEC to CEE7 European
cord set is supplied with the unit for use on 10 Amp 240VAC service*.
The total maximum current load for all outlets cannot exceed 12 Amps at
115VAC or 10 Amps when used at 240VAC.
The sBB-2C10 is for international applications and can be used on 100V
to 240VAC. The sBB-2C10 provides two IEC 320 style universal inlets for
connecting a detachable power cord. Two standard IEC to CEE7
European cord sets are supplied with the unit for use on 10 Amp
240VAC service*. The total maximum current load for outlets on any
linecord cannot exceed 12 Amps at 115VAC or 10 Amps when used at
240VAC. Each linecord distributes power to four outlets.
The sBB-C20 is for international applications and can be used on 100V to
240VAC. The sBB-C20 provides an IEC 320 style universal inlet for
connecting a detachable power cord. A standard IEC to CEE7 European
cord set is supplied with the unit for use on 20 Amp 240VAC service*.
The total maximum current load for all outlets cannot exceed 16 Amps.
The sBB-2C20 is for international applications and can be used on 100V
to 240VAC. The sBB-2C20 provides two IEC 320 style universal inlets for
connecting a detachable power cord. Two standard IEC to CEE7
European cord sets are supplied with the unit for use on 16 Amp
240VAC service*. The total maximum current load for outlets on any
linecord cannot exceed 16 Amps. Each linecord distributes power to
four outlets.
* Power cords for other countries are available from your local source. If a power cord with a different terminating plug is
required, be sure it is properly rated and meets all the required local electrical standards.