Dataprobe sBB-2C10, Installation And Operations

Page: 13 / 20

Serial iBootBar v090212d
Page 13
Command Description Access Fact Def
set logging <yes/no>
Turns on or off event logging
get logging
Gets the current logging setting
set alarms <yes/no>
Turns on of off current alarm reporting
get alarms
Gets current alarm reporting status
get console
Displays the current console configuration, Timeout and Baud Rate Admin
set console timeout <30-3600/disable>
Console can be set to automatically logout with no activity for 30
seconds to 1 hr in seconds, or disabled. Admin 120
set console baudrate <2400/4800/9600/19200/38400/
57600/115200>
The baud rate of the serial port. 400,4800,9600,19200
,38400,57600,115200 bps Admin 115200
set factory defaults
Resets a ll parameters to their factory settings Confirmation is
required. Note: This command can take up to 30 seconds to execute. Admin
logout
Ends the session User
reboot
Reboots the selected iBootBar. This will not change the status of the
outlets. Admin
Group Commands
Command Description Access Fact Def
get groups
Returns a list of the groups that the current user has rights to. User
get group <groupname>
Returns the details of the selected group User
set group <groupname> <on/off/cycle>
Controls the selected group User