background image

 

 

13.  Technical Support and Warranty 

 
Seller  warrants this product, if used  in accordance  with all applicable  instructions, to be free from original  defects in 
material and workmanship for a period of 

Three Years

 from the date of initial purchase.  If the product should prove 

defective within that period, Seller will repair or replace the product, at its sole discretion.  Repairs may be made with 
new or refurbished components and replacements may be new or refurbished at the Sellers sole discretion. Repaired 
or replaced units shall be warrantied for the balance of the original warranty, or 90 days, whichever is greater. 
 

If Purchased from Dataprobe Inc.; 

Service under this Warranty is obtained by shipping the product (with all charges 

prepaid)  to  the  address  below.    Seller  will  pay  return  shipping  charges  within  the  United  States.    Call  Dataprobe 
Technical Service to receive a Return Materials Authorization (RMA) Number prior to sending any equipment back for 
repair.  Include all cables, power supplies, accessories and proof of purchase with shipment. 
 

If purchased from an Authorized Dataprobe Reseller;

 Service under this Warranty is obtained by contacting your 

Authorized Dataprobe Reseller.   
 

THIS  WARRANTY  DOES  NOT  APPLY  TO  NORMAL  WEAR  OR  TO  DAMAGE  RESULTING  FROM  ACCIDENT, 
MISUSE,  ABUSE  OR  NEGLECT.    SELLER  MAKES  NO  EXPRESS  WARRANTIES  OTHER  THAN  THE 
WARRANTY  EXPRESSLY  SET  FORTH  HEREIN.    EXCEPT  TO  THE  EXTENT  PROHIBITED  BY  LAW,  ALL 
IMPLIED  WARRANTIES,  INCLUDING  ALL  WARRANTIES  OF  MERCHANT  ABILITY  OR  FITNESS  FOR  ANY 
PURPOSE  ARE  LIMITED  TO  THE  WARRANTY  PERIOD  SET  FORTH  ABOVE;  AND  THIS  WARRANTY 
EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. 
 

Some  states  do  not  allow  limitations  on  how  long  an  implied  warranty  lasts,  and  some  states  do  not  allow  the 
exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to 
you.    This  warranty  gives  you  specific  legal  rights,  and  you  may  have  other  rights  which  vary  from  jurisdictions  to 
jurisdiction. 
 

WARNING:

 The individual user should take care to determine prior to use whether this device is suitable, adequate or 

safe  for  the  use  intended.    Since  individual  applications  are  subject  to  great  variation,  the  manufacturer  makes  no 
representation or warranty as to the suitability of fitness for any specific application. 
 
 

Dataprobe Inc. 
Technical Support:  201-934-5111 

[email protected]

 

www.dataprobe.com/support.html 

 

Summary of Contents for iBoot-DC





























Reviews: