iBoot-PDU_v170515e
iBoot-PDU User Manual
Page 8
first two minutes of powering up the iBoot-PDU. The DMU will only work with iBoots on the same physical
subnets as the PC
Complete instructions for the DMU are provided in the download.
Web Page Setup
3.5.2.
From the home page (Dashboard), click on Network -
> Addresses. Enter the new IP Address, Subnet
Mask, Gateway and DNS, then click Save. Click the
RESTART button to restart the iBoot-PDU with the
new settings. To lock the settings, select IP Mode =
Static. If IP Mode remains or is programmed to
DHCP, the iBoot-PDU will obtain an address from a
DHCP Server as soon as it finds one.
Telnet
3.5.3.
See Section 9 for telnet commands to set the IP
address and related settings.
3.6.
Web Browser Control
The iBoot-PDU web interface provides the easiest means of operating the outlets and monitoring the
current status of the units. One or more outlets can be simultaneously controlled with a few mouse clicks.
To Control any of the outlets, From the
Dashboard screen, highlight the outlet(s) to be
controlled with a mouse click, then click on the
desired Action Buttons ON
– OFF - CYCLE
When Cycle is selected, the outlet(s) will cycle
for the amount of time set (default 10
Seconds). When more than one outlet is
controlled to turn on, there will be a delay
between outlets turning on, as set by the delay
setting (default 1 Second).
