iBoot-PDU_v170515e
iBoot-PDU User Manual
Page 7
3.3.
Rear Panel
– IEC Versions
8 Outlet Models
3.3.1.
4 Outlet Models
3.3.2.
3.4.
Quick Start Defaults
IP address
192.168.1.254 Or as Set by DHCP Server.
User Credentials
Username: admin
Password: admin
Command Line Quick Start:
To view outlet status
iBoot-PDU> get outlets
To turn on off outlet 1
iBoot-PDU> set outlet 1 off
To reboot outlet 2
iBoot-PDU> set outlet 2 cycle
3.5.
Changing the IP Address
The iBoot-PDU is factory default to obtain an IP address from a DHCP server, if one is found at startup. If a
DHCP server is not found, the unit will default to IP address 192.168.1.254. There are several ways to set
the IP Address.
Device Management Utility
3.5.1.
Obtain the Device Management Utility (DMU) from
Dataprobe’s website at
dataprobe.com/support-
documents/iboot-pdu/
Open the DMU on a PC on the same physical network
as the iBoot-PDU and select
Device > Discover
to
display the current IP Address of the iBoot-PDU.
Select
Set > Network Settings
to change the network
settings. The IP settings can only be set within the
