iBoot-PDU_v170515e
iBoot-PDU User Manual
Page 15
To control a group from the Dashboard, select it by clicking on the card. This will expand the group and present
the control buttons:
Click on On, Off or Cycle to perform the desired operation. As with multiple selected outlets, the On function
will be subject to the Delay time between turning on each of the outlets in the group.
See Section 0 for Group Configuration
Sequence Card
5.2.5.
Sequences are pre-programmed action steps that can be
initiated on command, or linked to an Automation Trigger.
The Sequence Card displays the name of the sequence and
the current status Stopped or Running.
To control a Sequence, click on the card to expand it and
display the RUN or STOP button as appropriate.
See Section 5.6 for more about Sequences
Trigger Card
5.2.6.
Triggers define the automation settings of the iBoot-PDU.
Each trigger represents an aspect of the iBoot-PDU that is
continuously monitored, and the condition that sets off one or
more actions when that condition is met.
Triggers have three states that are represented on their card
that appears on the dashboard.
Gray : Trigger disabled
Green: Trigger condition has not been met
Red: Trigger condition has been met
Triggers can be enabled and disabled from the card, as well
as hidden from the dashboard. Click on the trigger card to
expand it for these functions.
See Section 6 for more about Triggers and Automation
