background image

3

Specification

Board Format

Full size, 8 Lane PCIe 3.0 interface

Connectors

Two DMS59 high density video connectors

Maximum Sample Rate

170Mpixels per second analogue RGB or 165 MHz DVI.

Maximum Data Rate

800 MB/s bandwidth per capture processor

Video Sampling

24 bits per pixel / 8-8-8 format.

Video Capture Memory

256MB per capture channel, triple buffered

Analogue RGB Mode Support

640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 

1080, 1920 x 1200, custom modes.

DVI Single Link Mode Support

640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 

1920x1080, 1920 x 1200, and custom modes.

HD Modes

1080p,1080i, 720p, 576p, 576i, 480p and 480i using a Component-

DVI connector For HDCP support, contact the Sales department for 

more information

Input Mode Detection

Automatic detection of input modes in hardware, enabling the 

tracking of mode changes in the source signal.  DirectShow streams 

are maintained at a fixed resolution across mode changes.

Pixel Transfer Formats

RGB:  5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels. 

YUV:  4:2:2.   

MONO:  8bit.

Update Rate

User defined, captured frame rate will match the source providing 

max data rate (800MB/s) is not exceeded.

Multi-buffered to eliminate tearing artifacts.

Video Format Options

Analogue RGB plus HSync and VSync (5 wire).  

Analogue RGB with Composite Sync (4 wire).  

Analogue RGB with Sync on Green/YPbPr (3 wire).   

DVI Single Link, HDMI 1.3 

Operating System Support

Windows XP, Windows Server 2003, Windows Vista, Windows Server 

2008, Windows Server 2012, Windows 7, Windows 8 and Linux*  

support (not audio) See www.datapath.co.uk for updates.

Power Requirements

Max current at 1.9A @ 12V 

Max current at 2.5A @3.3V 

Max power 31 Watts

Operating Temperature

0 to 35 deg C / 32 to 96 deg F

Storage Temperature

-20 to 70 deg C / -4 to 158 deg F

Relative Humidity

5% to 90% non-condensing.

Warranty

3 years.

We are continuously developing the technology used within our product ranges delivering outstanding in-
novative solutions,     therefore the specification may change from time to time.

* Denotes not yet available, contact sales for details

Summary of Contents for The VisionHD4














Reviews: