DataOn Storage CiB-9224 V12, Tech Manual

Page: 37 / 44

Hardware Operations
Figure 2-16 SAS I/O Module Locations
Reminder
Before you remove or install the SAS I/O board, please follow the steps below:
Step 1
：
Only replace one SAS I/O module at a time.
Step 2
：
Disconnect all necessary cables. Make sure at least on SAS I/O module to provide
I/O path to HDD/SSD
2.6.1 To remove the JBOD Module
Pull the lever open.
Slide the JBOD assembly out of the chassis by using the lever.
Figure 2-17 Removing the JBOD Assembly
When install the JBOD assembly:
Please mind fingers between the lock hinge and tray as it may cost injuries
2-9
CiB-9224 V12