DataOn Storage CiB-9224 V12, Tech Manual

Page: 32 / 44

Hardware Operations
Figure 2-5 Removing the Power Supply
2.3.2
To install the power supply
Insert the replacement power supply firmly into the bay. The retaining clip should snap.
Connect the AC power cord to the replacement power supply.
Figure 2-6 Installing the Power Supply
2.4 2.5” SAS HDDs
The CiB-9224 V12 support up to 24 x 2.5” hot-pluggable SAS HDD / SSD. You don’t need to
power-off the system when removing or installing a HDD / SSD.
The location of 2.5” SAS HDD / SSD assemblies on the server is shown below:
CiB-9224 V12
2-4