Datamax OC2 BT, Technical Manual And User Manual

Page: 61 / 69

15
Radio LED*
Blue flash - slow* RF power is on and printer is asleep.
Blue flash - fast* RF power is on and printer is awake.
Blue flash to solid red The printer is out of range of the access point
and/or infrastructure and it is not correctly
configured for the radio it recognizes.
* If the signal quality option is on (default is off) and the
printer is awake, the amount of time the blue radio LED is on
indicates the signal strength. For example, if the blue LED is
on 90% of the time, the printer has a very strong signal;
however, if the blue LED is on only 10% of the time, the
printer has a very weak signal. When the signal quality option
is turned on, the blue radio LED indicates signal strength only.
When the printer is asleep, the radio strength is not indicated.
Reset Button
Reset Button
Short press Re-boots printer and cycles power.
CardReader Audio Indicators
Beep(s) Description Action
1 long Bad read. None. 2 short Good read.
None.
Using a CardReader
Note:
T
he following information applies to printers installed
with the CardReader option.
Off RF power is off.